国产黄A一级二级三级看三区,91久久综合亚洲鲁鲁五月天,未满十八18禁止午夜免费网站,国产天堂爱AAAA级毛片,人妻丰满熟妇av无码HD
 流量計算:shequ1.hnwxkf.com

隨著科學技術的進步和市場空間的不斷擴大,食品飲料行業得到了空前的發展,生產效率需要大幅提高。然而傳統的輸送帶潤滑方式已不能滿足需求,干、濕潤滑逐漸取代傳統的潤滑方式并成為主流。

                                              image.png

 

概述

 

集中潤滑系統由中央泵站、控制系統、管道和噴嘴組成。

早期輸送帶的潤滑方式采用皂液浸泡槽,即利用浸泡鏈板的方式用皂液進行潤滑。

干式潤滑系統因無水零排放的特點,更適合飲料乳品生產線高衛生標準的使用。

濕潤滑系統結構簡單,使用和維護的成本相比干潤滑略低,適用性更廣,尤其適合金屬鏈板的潤滑。

 

濕式潤滑

 

濕潤滑系統是針對飲料、 啤酒生產線,適合鏈板的輸送潤滑,通過分段噴淋間隔停開的功能,最大限度控制水和潤滑劑的成本。

image.png image.png

 

干潤滑

干潤滑系統是專為塑料鏈板輸送所提供的方案,幫助PET及紙盒包裝的客戶減少潤滑用水量99%以上,同時提高輸送帶的速度減少倒瓶,降低水的使用還可以保持工作環境整潔、地面干燥,從而提高了現場操作人員的安全度,降低設備維護成本,增加生產效率。

image.png image.png

 

濕式潤滑和干式潤滑的比較

性能對照

濕式潤滑

干式潤滑

適用性

適用絕大多數輸送鏈

只適合塑料類型鏈板

潤滑劑

潤濕, 滲透

附著, 成膜

現場狀況

泡沫不可避免

無泡沫,無水衛生狀況更佳

消耗

噴淋時間較長, 耗量大

噴淋時間短, 耗量少

能源消耗

需用水稀釋, 用水量較大

無需水稀釋, 環保節能減排

運行成本

略高

 

應用

●  啤酒和裝瓶廠

●  乳制品行業

●  面包房和糖果糕點廠

●  魚、肉、水果和蔬菜加工

 

With the advancement of science and technology and the expansion of market space, the food and beverage industry has seen unprecedented development and the need to significantly improve production efficiency. However, traditional conveyor belt lubrication methods can no longer meet the demand, dry and wet lubrication gradually replace the traditional lubrication methods and become mainstream.

 

Overview

 

The centralised lubrication system consists of a central pumping station, control system, pipes and nozzles.

In the early days the conveyor belt was lubricated by soap soaking tanks, i.e. by soaking the chain plates with soap.

Dry lubrication systems are more suitable for beverage and dairy production lines with high hygiene standards due to their water-free and zero discharge characteristics.

The wet lubrication system is simple in structure, slightly less expensive to use and maintain than dry lubrication, and more widely applicable, especially for lubrication of metal chain plates.

 

Wet lubrication

 

The wet lubrication system is designed for beverage and beer production lines and is suitable for the lubrication of chain plates. The function of stopping at intervals by means of segmented spraying allows maximum control of water and lubricant costs.

 

Dry lubrication

The dry lubrication system is a solution specifically designed for plastic chain conveyors, helping PET and carton packaging customers to reduce the amount of water used for lubrication by over 99%, while increasing the speed of the conveyor belt and reducing the number of empty bottles, reducing the use of water and also keeping the working environment clean and the floor dry, thus improving the safety of the operators on site, reducing equipment maintenance costs and increasing production efficiency.

 

Wet versus Dry Lubrication

Performance

Wet lubrication

Dry lubrication

Applicability

Suitable for most conveyor chains

Suitable for plastic type chains only

Lubricant

Wetting, penetrating

Adhesion, film formation

Field conditions

Foam unavoidable

No foam, better   hygiene without water

Consumption

Long spraying time, high consumption

Short spraying time, low consumption

Energy consumption

Water dilution required, high water consumption

No water dilution required, environmental friendly   and energy efficient

Operating costs

Low

Slightly higher

 

 

Applications

● Beer and bottling plants

● Dairy industry

● Bakeries and confectionery and pastry factories

● Fish, meat, fruit and vegetable processing



Contact Us
企業名稱:Mideler Fog Systems Co.Spray Solution Provider
電話:+86 ( 20 ) 3205 2002-802
手機:+86 18922120631
傳真:+86 ( 20 ) 3205 2003
郵箱:sales@mideler.com
地址:廣州市增城區新塘鎮永寧街荔新12路26號,漢騰智慧城科技產業園7號樓
? 版權所有 Mideler Fog Systems Co.Spray Solution Provider 粵ICP備16088326號
国产黄A一级二级三级看三区,91久久综合亚洲鲁鲁五月天,未满十八18禁止午夜免费网站,国产天堂爱AAAA级毛片,人妻丰满熟妇av无码HD